Avery Dennison Retail Information Services LLC RS500GX Manual Do Utilizador
TCRFIDRCD Rev. 00 8/14
©2014 Avery Dennison Corp. All rights reserved.
R E G U L AT O R Y C O M P L I A N C E I N F O R M AT I O N
The RS-500 (Impinj model number IPJ-RS500-GX) is approved for modular certification by FCC
and Industry Canada (IC) under the following ID numbers:
and Industry Canada (IC) under the following ID numbers:
FCC ID: GU6-RS500GX
IC: 1502A-RS500GX
Modular approval allows installation in different end-use products by an original equipment
manufacturer (OEM) with limited or no additional testing or equipment authorization for the
transmitter function provided by the RS500.
manufacturer (OEM) with limited or no additional testing or equipment authorization for the
transmitter function provided by the RS500.
In addition, the end product must comply with all applicable FCC equipment authorizations,
regulations, requirements and equipment functions not associated with the RS500. For example,
compliance must be demonstrated to regulations for other transmitter components within the
host product, to requirements for unintentional radiators (Part 15B), and to additional
authorization requirements for the non-transmitter functions.
regulations, requirements and equipment functions not associated with the RS500. For example,
compliance must be demonstrated to regulations for other transmitter components within the
host product, to requirements for unintentional radiators (Part 15B), and to additional
authorization requirements for the non-transmitter functions.
The OEM applying the RS500 is required to include all FCC and/or IC statements and warnings
detailed in the following sections to the end product labeling (where specified) and in the
finished product manual. The OEM must also strictly adhere to antenna and installation
guidelines and MPE restrictions stated in this document.
detailed in the following sections to the end product labeling (where specified) and in the
finished product manual. The OEM must also strictly adhere to antenna and installation
guidelines and MPE restrictions stated in this document.
P ro d u ct L ab e l i n g
A statement must be included on the exterior of the final OEM product which communicates that
the device identified by the aforementioned FCC
and Industry Canada ID numbers are contained
within the product. For example:
the device identified by the aforementioned FCC
and Industry Canada ID numbers are contained
within the product. For example:
This product contains a radio module certified as
FCC ID: GU6-RS500GX and
IC: 1502A-RS500GX
FCC ID: GU6-RS500GX and
IC: 1502A-RS500GX
OR
Contains FCC ID: GU6-RS500GX
Contains IC: 1502A-RS500GX
Contains FCC ID: GU6-RS500GX
Contains IC: 1502A-RS500GX
The OEM must include the following statements
on the exterior of the finished product unless the
product is too small (e.g. less than 4 x 4 inches):
on the exterior of the finished product unless the
product is too small (e.g. less than 4 x 4 inches):
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including any interference that may cause undesired operation.
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including any interference that may cause undesired operation.
DRAFT