Climax Technology Co Ltd 2752 Manual Do Utilizador

                   

6

 

IP(CID):  IP/GPRS reporting in CID 
format. 

 

Mail:  Email reporting. (SMTP setting 
required) 

 

Voice: Voice message reporting.  

 

Delete:  Choose “Delete” to remove 
existing report setting. 

Step 4. For GSM/SMS(CID)/IP(CID/IP(SIA) 

setting, you will be asked to enter an 
account number.  

Step 5. Enter the IP address for IP reporting, 

email address for email reporting or 
telephone/mobile number for 
GSM/SMS reporting. 

Step 6. For IP reporting, enter the port number. 

Step 7. Select a group for the report 

destination. 

 

The reporting priority is based on to 
group number sequence. From Group 
1 

 Group Group 2  Group 3 

….etc 

 

When more than one reporting 
destinations are assigned to a group, 
if a report is sent to one of the 
detinations successfully, the system 
will stop reporting to the rest of the 
reporting destination in the same 
group and move on to report to the 
next group.  

If the Control Panel fails to send report 
to the first detination in a group, it will 
move on to the next reporting 
destination. If all reporting destinations 
in the group cannot be reached, the 
Control Panel will move on to the next 
group 

If the Control Panel fails to report to all 
reporting groups, it will start reporting 
from group 1 and continue retrying 
until one report is made successfully. 

Step 8. Select the event type to be reported to 

this report destination. 

 

All: All events will be reported. 

 

Status:  Only status events will be 
reported. 

 

Alarm:  Only  alarm events will be 
reported. 

This function is for you to test the reporting 
destination you entered. 

Step 1. Select Test Report and press OK to 

confirm.  

Step 2. The Control Panel will send a test 

report to the first reporting destination.  

Use the function to record your Address 
Message for Voice Report, the Address 
Message is the first message played in every 
voice report to notify the call recipient of the 
caller’s information. The maximum length of 
the message is 10 seconds.   

Step 1. Select Record Msg and press OK to 

confirm.  

Step 2. Press OK to start recording. 

Step 3. The Control Panel will emit a beep. 

Start recording after the beep, speak 
clearly and slowly for the Control Panel 
to record your address. When you 
finish recording, press “OK” to stop 
recording, the recording will 
automatically stop when it reaches 10 
second. 

 

If you do not record your own Address 
Message, the system will play default 
alarm message when reporting. The 
default message is “Alarm System.” 

The GSM function allows you to program 
GRPS network and MMS settings,  

Step 1. Select GSM Setting and press OK to 

confirm.