Climax Technology Co Ltd HPGWG5DT16 Manual Do Utilizador
81
11.
SMS User Command
SMS User Command
If the SMS Keyword is set as Joe, and default user pin code 1 is 1234.
ITEM
COMMAND
USAGE
DESCRIPTION
Panel Mode
MODE
MODE:Joe,1234,1,4
It is used to change the arming mode.
First value (1)
First value (1)
area number
Second value(4)
Home Arm 3 mode
0: Disarm
1: Full Arm
2: Home Arm 1
3: Home Arm 2
4: Home Arm 3
1: Full Arm
2: Home Arm 1
3: Home Arm 2
4: Home Arm 3
Request
Image
REQIMG
REQIMG:Joe,7982,1,10
It is used to request PIR camera to take a picture.
First value (1)
First value (1)
Area Number;
Second value (10)
PIR Camera Zone Number.
Power Switch
On/ Off/
Toggle
PSS
PSS:Joe,1234,1,2,0
It is used to switch on/ off/ toggle power switch.
First value (1)
First value (1)
Area Number, 1 for Area 1, 2 for
Area 2
Second value (2)
PSS zone number
Third value (0)
action, 0 for switch off, 1 for
switch on, 2 for toggle
Reset
RESET
RESET:Joe,1234,10
It is used to reset the system. 10
delay 10
seconds to reset the system.
<NOTE>
1. If you don’t want to get a confirmation message to know whether your setting is correct or
not, you can add “nak” to the programming command, such as “PSS:Joe,1234,1,2,0,nak”. The
system will not return you a confirmation message to confirm that your setting is successful.
not, you can add “nak” to the programming command, such as “PSS:Joe,1234,1,2,0,nak”. The
system will not return you a confirmation message to confirm that your setting is successful.
2. Use comma (,) to separate each programming value such as “MODE:Joe,1234,1”.
3. SMS Keyword and user pin code 1 can be changed.