Arris 3387W Manual Do Utilizador
103
Configure
Link:
Internal Servers
Your Gateway ships with an embedded Web ser ver and suppor t for a Telnet
session, to allow ease of use for configuration and maintenance. The
default por ts of
session, to allow ease of use for configuration and maintenance. The
default por ts of
80
for HTTP and
23
for Telnet may be reassigned. This is
necessar y if a pinhole is created to suppor t applications using por t 80 or
23.
23.
for more information on Pinhole configura-
tion.
Web (HTTP) Server Port:
To reassign the por t number used to access the
Cayman embedded Web ser ver, change this value to a value greater than
1024. When you next access the embedded Cayman Web ser ver, append
the IP address with <por t number>, (e.g. Point your browser to
1024. When you next access the embedded Cayman Web ser ver, append
the IP address with <por t number>, (e.g. Point your browser to
http://
210.219.41.20:8080
).
Telnet Server Port:
To reassign the por t number used to access your Cay-
man embedded Telnet ser ver, change this value to a value greater than
1024. When you next access the Cayman embedded Telnet ser ver, append
the IP address with <por t number>, (e.g.
1024. When you next access the Cayman embedded Telnet ser ver, append
the IP address with <por t number>, (e.g.
telnet 210.219.41.20 2323
).
You can also use the LAN-side address of the Gateway, 192.168.1.x:8100
to access the web ser ver and 192.168.1.x:2323 to access the telnet
ser ver. The value of 0 for an internal ser ver por t will disable that ser ver.
You can disable Telnet or Web, but not both. If you disabled both por ts, you
would not be able to reconfigure the unit without pressing the reset button.
to access the web ser ver and 192.168.1.x:2323 to access the telnet
ser ver. The value of 0 for an internal ser ver por t will disable that ser ver.
You can disable Telnet or Web, but not both. If you disabled both por ts, you
would not be able to reconfigure the unit without pressing the reset button.