Arris 3387W Manual Do Utilizador
127
Security
Exposed Addresses
You can specify the IP addresses you want to expose by clicking the
Exposed addresses
link.
Add, Edit, or delete exposed addresses options are active only if NAT is dis-
abled on a WAN inter face. The hosts specified in exposed addresses will be
allowed to receive inbound traffic even if there is no corresponding out-
bound traffic.
abled on a WAN inter face. The hosts specified in exposed addresses will be
allowed to receive inbound traffic even if there is no corresponding out-
bound traffic.
•
Start Address
: Star t IP Address of the exposed host range.
•
End Address
: End IP Address of the exposed host range
•
Protocol
: Select the Protocol of the traffic to be allowed to the host
range from the pull-down menu. Options are Any, TCP, UDP, or TCP/UDP.