Arris 3387W Manual Do Utilizador
130
Stateful Inspection Options
Stateful Inspection Parameters are active on a WAN inter face only if you
enable them on your Gateway.
enable them on your Gateway.
•
Stateful Inspection
: To enable stateful inspection on this WAN inter-
face, check the checkbox.
•
Default Mapping to Router
: This is disabled by default. This option will
allow the router to respond to traffic received on this inter face, for exam-
ple, ICMP Echo requests.
ple, ICMP Echo requests.
•
TCP Sequence Number Difference
: Enter a value in this field. This
value represents the maximum sequence number difference allowed
between subsequent TCP packets. If this number is exceeded, the
packet is dropped. The acceptable range is 0 – 65535. A value of 0
(zero) disables this check.
between subsequent TCP packets. If this number is exceeded, the
packet is dropped. The acceptable range is 0 – 65535. A value of 0
(zero) disables this check.
•
Deny Fragments
: To enable this option, which causes the router to dis-
card fragmented packets on this inter face, check the checkbox.