Arris 3387W Manual Do Utilizador

194

You can use the 

command to display the current CONFIG 

settings for your Cayman Gateway. If you enter the 

 

com-

mand at the top level of the CONFIG hierarchy, the CLI displays 
the settings for all enabled functions. If you enter the 

 com-

mand at an intermediate node, you see settings for that node 
and its subnodes.

The Cayman Gateway command line inter face includes a step 
mode to automate the process of entering configuration set-
tings. When you use the CONFIG step mode, the command line 
inter face prompts you for all required and optional information. 
You can then enter the configuration values appropriate for your 
site without having to enter complete CLI commands.

When you are in step mode, the command line inter face 
prompts you to enter required and optional settings. If a setting 
has a default value or a current setting, the command line inter-
face displays the default value for the command in parenthe-
ses. If a command has a limited number of acceptable values, 
those values are presented in brackets, with each value sepa-
rated by a ver tical line. For example, the following CLI step com-
mand indicates that the default value is off and that valid 
entries are limited to on and off.

option (off) [on | off]: on

You can accept the default value for a field by pressing the 
Return key. To use a different value, enter it and press Return.

You can enter the CONFIG step mode by entering 

 from the 

top node of the CONFIG hierarchy. You can enter step mode for 
a par ticular ser vice by entering 

 In step-