Arris 3387W Manual Do Utilizador
217
CONFIG Commands
set pinhole name
name external-port-end [ 0 - 49151 ]
Specifies the last por t number in the range being translated.
set pinhole name
name internal-ip internal-ip
Specifies the IP address of the internal host to which traffic of
the specified type should be transferred.
the specified type should be transferred.
set pinhole name
name internal-port internal-port
Specifies the por t number your Cayman Gateway should use
when for warding traffic of the specified type. Under most cir-
cumstances, you would use the same number for the external
and internal por t.
when for warding traffic of the specified type. Under most cir-
cumstances, you would use the same number for the external
and internal por t.
PPPoE /PPPoA Settings
You can use the following commands to configure basic set-
tings, por t authentication settings, and peer authentication set-
tings for PPP inter faces on your Cayman Gateway.
tings, por t authentication settings, and peer authentication set-
tings for PPP inter faces on your Cayman Gateway.
Configuring Basic PPP Settings.
☛
NOTE:
For the DSL platform you must identify the vir tual
PPP inter face [
PPP inter face [
vccn
], a number from 1 to 8.
set PPP module [vccn] option { on | off }
Enables or disables PPP on the Cayman Gateway.