Arris 3387W Manual Do Utilizador
56
Configure
Button: Configure
The Configuration options are presented in the order of likelihood you will
need to use them.
need to use them.
Quickstart
is typically accessed during the hardware
installation and initial configuration phase.
Often, these settings should
be changed only in accordance with information from your Service
Provider.
Provider.
LAN
and
WAN
settings are available to fine-tune your system.
Advanced
provides some special capabilities typically used for gaming or
small office environments, or where LAN-side ser vers are involved.
☛
This button will not be available if you log on as User.
Quickstart
How to Use the Quickstart Page.
Quickstar t is normally used immedi-
ately after the new hardware is installed. When you are first configuring your
Gateway, Quickstar t appears first.
Gateway, Quickstar t appears first.
(Once you have configured your Gateway, logging on displays the Home
page. Thereafter, if you need to use Quickstar t, choose it from the Exper t
Mode Configure menu.)
page. Thereafter, if you need to use Quickstar t, choose it from the Exper t
Mode Configure menu.)
Link:
Configure -> Quickstart
Setup Your Gateway using a PPP Connection.
This example screen is the for a
PPP Quickstart
configuration. Your gate-
way authenticates with the Ser vice Provider equipment using the ISP User-