Exicom Limited EX7100-1 Manual Do Utilizador

 

EX7100 Technical Manual - Configuring the Terminal

 

©1999 Exicom Technologies (1996) Ltd 

3-1 

Issue 1 - May 2001 

In many cases, the terminal will have been configured in the factory, however it is 
recommended that certain operating parameters be checked and corrected as required 
before attempting to set-up a link. 

The EX7100 is equipped with a powerful configuration, monitoring, and diagnostic, system 
that may be accessed using the six-button keypad and LCD on the front panel. The front 
panel also has four LED's that indicate the operating status of the terminal, as well as any 
alarms being generated by the terminal. 

The EX7100 six-button keypad allows the user to scroll through the user interface menu, 
and then select, or change, the relevant parameters. 

A password is required to allow access to the menu system. This password is ‘1111’, and 
cannot be changed. A Second Level password is required to allow amendment of 
operating parameters. This password may be changed at any time from the Exicom 
default value of ‘1234’. Refer to Section 3.4.1 for details. 

 
 
 

The four direction buttons provide up and down scrolling, as well as moving the cursor left 
and right along any particular line.  

Example: To change the default second level password from ‘1234’ to ‘2222’ 

(Refer to Section 3.4.1 for full details): 

> 

Use the right arrow key to position the 

↑↑↑↑

 under the ‘1’.  

> 

Press the up arrow key once to change the ‘1’ to a 2.  

> 

Press the right arrow key twice to position the 

↑↑↑↑

 under the ‘3’. 

> 

Press the down arrow key once to change the ‘3’ to a 2. 

> 

Press the right arrow key once to position the 

↑↑↑↑

 under the ‘4’. 

> 

Press the down arrow key twice to change the ‘4’ to a 2. 

> 

Press ‘Enter’ to accept changes.  

   Exicom  EX7100 

   1 Jan  1200.01