Advance Security Inc T24 Manual Do Utilizador

VM-KEM1 MANUAL

1. Power On Status: All function Off

2. Learn-in Code:

1. Turn IGNITION OFF to ON (open for 15 seconds)

2. Press VALET SW.OFF/ON 3 times, LED ON turned on and activate learn-in-Code MODE.

2.1 Press Btn”1” to learn the first TX.

2.2 ---- Horn 20ms, one Beep, Press LED OFF/ON once.

2.3 Other Keys automatically activated.

2.4 Back to 2.2.1 learn the next TX, up to 4 TX code.

3. Turn IGN ON to OFF, or 15seconds time-out, ending learn-in-code process: LED OFF

3. Common TX function

TX BUTTON

FUNCTION

REMARK

Lock Door

Horn 1 Chirp

(2 times/3sec ,20ms)

P/L 1 flashing, D/HT

Dimming .

Unlock Door

P/L 2 flashing, D/HT On, Dimming after 30 seconds

2-Step Unlock

Press 2 times in 3seconds

Silent Lock / Unlock / DUL#2 Press 2 keys at the same time

AUX

0.5 sec

Trunk (CH#2)

0.5sec

On /

0.5sec

Off (Exit Light)

3 sec PANIC
(0.3”On/0.75”Off)

Horn Chirping, P/L flashing 60sec

without D/L,D/UL

with CH#2

4. FEATURE PROGRAM: ★★:

RED part is Default Setting

4.1 IGN OFF TO ON (open for 15 Sec),VALET SW ON/OFF(6 times), finished in 15 Sec.

4.2 Chirp 6 Beep, LED ON, proceed Setup, as below circumstance

4.3 IGN OFF shutdown FEATURE Mode, Horn Chirp 1 short-sound 1long-sound

4.4 FEATURE TABLE

Press TX

Btn X

One Chirp ,
LED 0.3

2 Chirps ,
LED 0.3 - 2 pulse

3 Chirps ,
LED 0.3 - 3 pulse

4 Chirps,
LED 0.3 - 4 pulse

Ign “On”TX activates

Ign “On” TX No
function

If Ign”On”(AUX, PANIC)

Rearm Off

Rearm On

AUX

Exit Light On 3
minutes

Exit Light On 5
minutes

Exit Light On 10
minutes

Exit Light On 15
minutes

5 Chirps ,
LED 0.3 - 5 pulse

Exit Light On 20
minutes

5. D/HT Function:

Dimming Time 5 sec

5 -1. Door Open / Close = D/HT On 20 sec, then Dimming .

5 -2. Remote Door Unlock = D/HT On 30 sec, then Dimming .

5 -3. Ext Car Remote Lock The Door then Dimming

5-4. Ign On D/HT Off then Dimming