HARRIS CORPORATION CS803 Manual Do Utilizador
Enable/Disable Side Tones
The control station user interface sounds confirming tones when
the Menu or Selector buttons are pressed. Most users find this
audible confirmation helpful in navigating the menus in the
Display Panel.
the Menu or Selector buttons are pressed. Most users find this
audible confirmation helpful in navigating the menus in the
Display Panel.
The side tone level can be adjusted, by navigating to the Side
Tone menu, and selecting Off, Low, Med, or High.
Tone menu, and selecting Off, Low, Med, or High.
To temporarily disable the tones use the Menu Selector buttons
to access the Side Tone Menu. Select Off from the menu
choices.
to access the Side Tone Menu. Select Off from the menu
choices.
If the control station user interface is operating properly but tones
are not heard when the Menu or Select buttons are pressed, the
side tones are most likely disabled. Access the Side Tone menu
and reset the Tones to On.
are not heard when the Menu or Select buttons are pressed, the
side tones are most likely disabled. Access the Side Tone menu
and reset the Tones to On.
Use the following procedure to enable or disable Side Tones:
1. Use the Up and Down buttons to cycle through the Menu
choices until SideMenu appears.
2. Use the Left or Right button to change the display from the
menu choices (Off, Low, Med, High).
3.
Press the Select button to lock in your choice.
Your selected Dwell Display will appear as soon as the CS-803
accepts your choice.
accepts your choice.
Figure 2-4: Side Tones Menu
Menu Option: Side
Tones (Off, Low,
Med, High)
Tones (Off, Low,
Med, High)
Active Menu:
Side Tones
Side Tones