HARRIS CORPORATION CS803 Manual Do Utilizador
33
2.1.6 Emergency Communications
Your control station can send out an Alert or place Voice Calls
over the entire network in an emergency. OpenSky handles
Emergency Calls and Alerts with the very highest priority, giving
you and the people you serve access to the help you need no
matter how much traffic the network is handling.
over the entire network in an emergency. OpenSky handles
Emergency Calls and Alerts with the very highest priority, giving
you and the people you serve access to the help you need no
matter how much traffic the network is handling.
How to Place an Emergency Call
1. Press the red Emergency Button on your user interface to
send an emergency alert. You will find the button just to the
right of the 5-button Menu and Selector keypad.
right of the 5-button Menu and Selector keypad.
2. You will hear the emergency tone if you are successful.
Other users will hear the Emergency Alert signal, a
distinctive 3-tone burst of sound.
distinctive 3-tone burst of sound.
3. At the same time, the network enables the Emergency
Talkgroup provisioned in your current talkgroup.
4. The microphone is opened for a programmed amount of time
in order to send your voice out over the emergency talk
group.
group.
5. Based on your provisioned priorities, the radios in the
Emergency Talkgroup will hear your call and see the
emergency talk group displayed on their radio.
emergency talk group displayed on their radio.
6. When your emergency ends or if you inadvertently pressed
the button, press and hold the red Emergency Button a
second time to clear the emergency alert and call. Only you,
the user who initiated the alert, dispatcher, or the network
administrator can clear an emergency.
second time to clear the emergency alert and call. Only you,
the user who initiated the alert, dispatcher, or the network
administrator can clear an emergency.