HARRIS CORPORATION CS803 Manual Do Utilizador
37
2.2.3 Self-Test
After Power Up, your CS-803 control station undergoes a multi-
function automatic Boot procedure. Your control station is
provisioned with your user personality: as many as 16 user
profiles are downloaded to your equipment from the network in
response to your User ID. Emergency behavior is provisioned
along with each profile.
function automatic Boot procedure. Your control station is
provisioned with your user personality: as many as 16 user
profiles are downloaded to your equipment from the network in
response to your User ID. Emergency behavior is provisioned
along with each profile.
Your control station conducts a diagnostic Built-In Self-Test
(BIST). The Self-Test is a battery of hardware diagnostic tests on
the internal components of the control station. All processor and
memory elements, interfaces, connectivity elements, and RF
functionalities are diagnosed for operational integrity.
(BIST). The Self-Test is a battery of hardware diagnostic tests on
the internal components of the control station. All processor and
memory elements, interfaces, connectivity elements, and RF
functionalities are diagnosed for operational integrity.
2.2.4 How to Turn the Control Station/TRCM-103
Off
1. Push the Power Switch on the rear panel of the CS-803.
The LED on the front of the CS-803 will cease to illuminate
to indicate Power Down.
to indicate Power Down.
2. Several user-selected radio settings will survive the Power
Down procedure.
3.
At your next Power Up, these saved settings will
automatically default, along with your network personality
settings.
automatically default, along with your network personality
settings.
2.2.5 How to Change the Volume
See the Third Party Desk Set’s User Manual for changing the
volume setting.
volume setting.