Cybiotronics Limited 677001 Manual Do Utilizador

Your new telephone includes the highest quality NiMH (Nickel Metal Hydride)

rechargeable batteries available. Following these simple instructions can

significantly improve your operational results.
CHARGING THE BATTERY PACK
Charge all battery packs for at least 15 hours prior to connecting to the telephone line.

1. Press the battery release point on the back of the handset and slide downward to

open the battery com partm ent.

2. Insert the battery pack into the battery com partment and m ake sure to position the

battery pack so that it is touching the charging contacts.

3. Slide the battery cover upward until it snaps into place.
4. Connect the AC adapter to the 7.5V DC jack of the base unit and to a standard 120V

AC wall outlet.

5. Place the handset on the base unit. Make sure the Charge indicator on the base

unit lights, and charging begins.

6. The battery icon on the handset changes from very low, to low, to m edium , to full

and repeats as a cycle. It only stops after leaving the charging cradle.

Battery Low
The battery icon on the right of the display shows the level of battery.

Full

Medium

Low

Very low

If the handset battery is not properly charged, there is a warning tone while the handset

is in use and “BATTERY LOW ” is displayed. W hen this occurs the handset does not

function when you press the keys.

Cleaning the Battery Contacts
To m aintain a good charge, it is important to clean all battery contacts on the handset

and the base unit with a soft, dry cloth about once a month. You m ay also use a pencil

eraser or other contact cleaner. Do not use any liquids or solvents.

G ET T IN G START E D