Cybiotronics Limited 677001 Manual Do Utilizador

WALLMOUNTING BASE UNIT

The base unit can be m ounted on a wall phone plate by using the supplied wall-mounting

bracket.

1. Bring the barrel plug of the AC adapter through the

rectangular opening of the wall-m ounting bracket.

2. Plug the AC adapter’s barrel plug into the jack marked

“500m A DC 9V” at the bottom of the base unit and press

the cord in the slot above the jack.

3. Bring the short telephone line cord through the

rectangular opening of the wall-m ounting bracket and

plug it into the jack marked “LINE”.

4. Insert 2 hook-tabs and 2 short

tabs of the wall-m ounting

bracket into the slots at the

back and bottom of the base unit sim ultaneously.

5. Press the wall-mounting bracket against the base unit

until they are rest on each other firm ly.

6. Hold the base unit up next

to the wall jack and plug the

line cord into the wall jack,

any extra line cord can be

hided inside the

wall-mounting bracket.

7. Place the base unit on the posts of the wall plate and

push down until the unit is secured firm ly.

8. Plug the AC adapter into a standard wall outlet.

Note: If you are not using a standard wall plate to mount the phone on wall, you m ay also

m ount it with ordinary screws. Use the W all m ount Tem plate on page 59 to affix two

screws at your desired location. Rem em ber to leave 1/8 inch of the screw extending

from the wall.

Please charge all the batteries for at least 15 hours prior to initial use.

GET T IN G STAR T E D

Hook tab

Short tab

long tab

short tab

PICTURE

TO BE

UPDATED

PICTURE

TO BE

UPDATED

PICTURE

TO BE

UPDATED