Tait International Limited TBCK4B Manual Do Utilizador

Página de 132
DRAFT 4 
18
Description
TB9400 Installation and Operation Manual
© Tait Electronics Limited September 2011
1.6
Licenses
Some operational functions of the 
base station
 are controlled by licenses. 
These functions will not work unless you purchase the appropriate feature 
license and enable the feature set controlled by that license. The feature sets 
currently available are listed below.
P25 Common Air 
Interface
Allows the 
base station
 to go into Online mode. 
Base stations
 are always 
provided with this license.
P25 Trunking 
Operation
Allows a 
base station
 to participate in a trunking system. Without this 
feature, the 
base station
 cannot provide a control or a status connection to a 
trunking site controller and it cannot function as a control or traffic channel.
Networking with 
Centralized Voter
Allows the 
base station
 to act as a central voter within its channel group. This 
feature also allows voice networking. Only 
base stations
 that will centrally 
vote (normally the central voter and its backup) need this feature. The other 
members of the channel group only need the networking with distributed 
voter feature. A standard trunked 
base station
 (standalone without fill-in 
repeaters or other channel group members) can function as a master or a 
failsoft repeater without this license. 
Simulcast 
Transmitter
This feature is required in 
base stations
 that have transmitters and belong to 
a simulcast network.
Simulcast 
Modulation
Allows the 
base station
 to transmit using the LSM modulation scheme. This 
scheme is designed to minimize performance degradation in simulcast 
channels caused by delay spread.
Failsoft for P25 
Trunking
Allows trunked channels that become isolated from a site controller to 
perform simple conventional operation and to interface to a digital dispatch 
system. If a trunked channel consists of several 
base stations
 in a channel 
group, only the central voter (normally the master) needs this license. It is 
then able to become the failsoft repeater for that channel group. 
Phase 2 Operation
 
(not yet available)
This feature will allow the 
base station
 to operate in trunking mode using 
two-slot TDMA as defined by the P25 Phase 2 standard.