Tait International Limited TBCK4B Manual Do Utilizador
DRAFT 4
42
Operation
TB9400 Installation and Operation Manual
© Tait Electronics Limited September 2011
3.2.2
PA
The indicator LEDs on the PA are visible through a slot in its front panel.
Indicator LEDs
These LEDs provide the following information about the state of the PA:
■
steady green - the PA is powered up
■
flashing green - the PA has no application firmware loaded or activated;
you can use the web interface
you can use the web interface
to download or activate the firmware; also
■
flashing red - one or more alarms have been generated; you can use the
web interface to find out more details about the alarms.
web interface to find out more details about the alarms.
Note
The alarm LED will flash whenever an alarm is generated,
whether or not this alarm has been disabled via the web interface.
whether or not this alarm has been disabled via the web interface.
Figure 3.4
Indicator LEDs on the PA
b
indicator LEDs
b
50 W PA
100 W PA