Tait International Limited TBCK4B Manual Do Utilizador
DRAFT 4
TB9400 Installation and Operation Manual
Replacing Modules
97
© Tait Electronics Limited September 2011
8.3
Replacing a Reciter
Removal
1.
If you have not already done so, carry out the instructions in
2.
At the rear of the reciter, unplug the RF input cable
b
, any system
cables
c
, and the external reference
d
and 1 PPS
e
cables (if fitted).
3.
At the front of the reciter, unplug the transmit reverse
f
and transmit
forward
g
cables, and move both cables to one side. Unplug both
ends of the system control bus cable
h
and remove it.
4.
Loosen the screw securing the retaining clamp
i
and rotate the
clamp through 90° to clear the module.
5.
Slide the reciter out of the subrack, taking care not to damage any of
the cables.
the cables.
b
c
d
e
f
g
h
i