Tait International Limited TMBH7A Manual Do Utilizador
Scanning 67
Activating talkgroup scanning
Talkgroup scanning monitors calls from multiple
trunked talkgroups, and up to five additional
conventional channels (P25 or analog), from across
zones. If conventional channels are included as group
members, your radio will briefly leave the trunking
control channel to scan these channels at regular
intervals.
trunked talkgroups, and up to five additional
conventional channels (P25 or analog), from across
zones. If conventional channels are included as group
members, your radio will briefly leave the trunking
control channel to scan these channels at regular
intervals.
Talkgroup scanning is useful if you need to operate
across multiple trunked talkgroups. When talkgroup
scanning is activated, the currently-selected talkgroup
or channel is temporarily included in the scan group. If
you change zones, the radio continues to monitor
group members as well as the currently selected
talkgroup or channel from the new zone.
across multiple trunked talkgroups. When talkgroup
scanning is activated, the currently-selected talkgroup
or channel is temporarily included in the scan group. If
you change zones, the radio continues to monitor
group members as well as the currently selected
talkgroup or channel from the new zone.
To turn talkgroup scanning on:
■
Press Menu and select Radio settings >
Functions > Scanning, or press the function key
programmed for talkgroup scanning.
Functions > Scanning, or press the function key
programmed for talkgroup scanning.
Talkgroup scanning remains on until you either
press the function key again, or select a standard,
background or in-zone scan group.
press the function key again, or select a standard,
background or in-zone scan group.
Making a call while scanning
If you want to make a call while your radio is scanning:
1 Lift the microphone off the microphone clip.
2 Press the PTT key to transmit.
If the orange LED is flashing, your radio calls the
currently selected channel.
currently selected channel.
If there has been no recent activity on the channel
(the orange LED is glowing rather than flashing),
then the channel that is called depends on the way
your radio has been programmed.
(the orange LED is glowing rather than flashing),
then the channel that is called depends on the way
your radio has been programmed.
The possible options are: