Tait International Limited TMBL3B Manual Do Utilizador
Operating in P25 trunking mode 61
You may still be able to communicate with your
dispatcher and other talkgroup members, depending
on the type of system failure that has occurred, and
how your radio is programmed.
dispatcher and other talkgroup members, depending
on the type of system failure that has occurred, and
how your radio is programmed.
When the trunking system returns to normal
operation, your radio is notified, and will attempt to
register on the control channel it was previously using.
operation, your radio is notified, and will attempt to
register on the control channel it was previously using.
Dynamic regrouping
The dynamic regrouping feature allows you to send a
dynamic regrouping request to your dispatcher. Your
dispatcher can then reassign your radio to a special
communications group.
dynamic regrouping request to your dispatcher. Your
dispatcher can then reassign your radio to a special
communications group.
Caution While you are operating on this group,
normal channel selection may be disabled.
normal channel selection may be disabled.
To send a dynamic regrouping request:
■
Press Menu and select Trunking >
Dyn Regrouping.
Dyn Regrouping.
When you press Select, a message appears in
the display.
the display.
If the request is successful, an acknowledgement
message is displayed.
message is displayed.
Sending
dynamic
regroup rqst
dynamic
regroup rqst
Cancel
Ack received
OK