Digital Monitoring Products Inc PC0181 Manual Do Utilizador

 

Associate up to four DMP 9060, 9062 Wireless LCD Keypads or 9862 Graphic Touchscreen Wireless Keypads to 

the XTLplus panel. The operation is shown and described in the following sections.

The following special keys or areas are common to all DMP keypads.
COMMAND (CMD) Key
Pressing the COMMAND key allows you to go forward through the programming menu and through each 

step of a programming sec tion. As you go through the programming, the keypad display shows any current 

programming already stored in the panel memory. If no change is required for an option, press the COMMAND 

key to advance to the next step.
The COMMAND key is also used to enter information into the panel’s memory such as phone numbers or zone 

names. Press the COMMAND key after entering information.
Back Arrow (<—) Key
Use the Back Arrow key to back up one step while programming. The Back Arrow key is also used when an 

error is made while entering in formation. Press the Back Arrow key once to erase the last character entered.
Select Keys or Areas
The top row of keys are called the select keys on Thinline and Aqualite keypads or select areas on Graphic 

Touchscreen keypads. Each time you need to press a select key or area, the keypad displays the function or 

options above one of the keys or in the select areas. Displaying choices above individual select keys or in 

select areas allows them to be used for many different applications. For example, you can enter AM or PM 

when programming the automatic test time or answer 

YES or NO for a system option.

During programming, the select keys allow you to change infor mation currently in panel memory by pressing 

the appropriate select key under the display. You then enter the new information using the keypad data 

entry digit keys.
When there are more than four re sponse options avail able, press the COMMAND key to display the remaining 

options. Pressing the Back Arrow key allows you to review the previous four choices.
The select keys are also used for choosing a section from the pro gramming menu. When the programming 

section name you want displays, press any select key.
On Wireless, Thinline and Aqualite keypads, when instructed to press the first select key, press the far left 

select key; the second select key is the second from the left; third select key is second from the right; and 

the fourth select key is the far right key. See Figure 12.
On Graphic Touchscreen Keypads, when instructed to press the first select key, touch select area 1; the 

second select key touch select area 2; third select key touch select area 3; and the fourth select key touch 

select area 4. See Figure 13.

MON   5:35 AM

DISARMED

Panic

Chime 

Check-In

Reset

Interactive Shield

Proximity Card

Reader

Micro SD

Card Slot

Carousel 

Menu

Dealer

Logo

Local Weather

Conditions

TODAY

WEDNESDAY

82

98  77

80

LO

74

HI

HI    LO

CURRENT

32-Character Display

Data Entry Digit keys 

COMMAND Key

Back Arrow Key

Select Keys

Backlit Logo 

and Proximity 

Antenna