N. V. Nederlandsche Apparatenfabriek NEDAP SF-LD40 Manual Do Utilizador
Control Unit Senzafil
Copyright © NEDAP
Installation Manual
2. Led indications
POWER
On Power
on
Off Power
off
CRTL
Fast blinking
Controlling lamps
Regular blinking (1s)
EEPROM error (RF LED also blinking)
Off Control
ready
RF
Irregular blinking
Receiving RF packets
Regular blinking (1s)
EEPROM error (CTRL LED also blinking)
Off
Receiving no RF packets
LAMP ERROR x
On
Lamp driver fault group x (>threshold)
Blinking
Lamp fault group x
Off
No errors group x
4. Specifications
FCC Declarations
Compliance statement (part 15.19)
This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Warning (part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
authority to operate the equipment.
RF Exposure (OET Bulletin 65)
To comply with FCC RF exposure requirements for mobile transmitting devices, this transmitter should only be used
or installed at locations where there is at least 20cm separation distance between the antenna and all persons.
or installed at locations where there is at least 20cm separation distance between the antenna and all persons.
Version:
1.0
Nedap P/N: 8015228
Input Voltage
Operating temperature
Safety
EMC
24Vdc ±2%
0 – 60°C
EN60950 / Design to meet UL60950-1
EN301489-1 / FCC47 part 15 and 18
Dimensions (l x b x h)
145 x 120 x 65 mm