N. V. Nederlandsche Apparatenfabriek NEDAP ADRRFMD Manual Do Utilizador

Page 

 of 

20

59

Manual iSense Lumen series

RF installation requirements

The operation of RF technology is affected by both coupling issues (the antenna couples with other objects)

and by active interferers (other devices that transmit a signal around 8.2 MHz). Objects that cause coupling

effects could be windows, doors, metal framing around the checkout, etc. Interferers can be created by

another RF system, but also motors driving doors or roller shutters.

Take the following placement requirements into account when projecting the location of gates:

There should be a minimum distance of 20 cm (8 in.) between the center of the gate and the wall.

There should be a minimum distance of 200 cm (6.6 ft.) between 8.2 MHz tags and/or labels and the

nearest antenna. If this is not possible, the labels and tags can be stored in a metal box in the checkout.

In addition, when 

 or 

 are present:

normal

sliding doors

There should be a minimum distance of 40 cm (16 in.) between the center of the gate and the door.