N. V. Nederlandsche Apparatenfabriek NEDAP ADRRFRFID Manual Do Utilizador

Page 

 of 

33

59

Manual iSense Lumen series

1.  

a.  

b.  

2.  

a.  

b.  

c.  

3.  

Orientation of products

Due to the orientation-sensitivity of the RFID antennas, the gates all need to be oriented in the same way. To

make sure this happens, please follow the listed steps in order:

Place all gates with the infrared beam sensors connector facing towards the customer entrance/exit of

the store.

For the stock room to sales floor and goods receiving role: this also holds here - the gates should

not face the goods delivery entrance/exit of the store. See the example below.

For the EAS role, when you need to secure a toilet: the toilet is considered as the customer

entrance/exit of the store. See the example below.

Find gate number 1.

To find gate number 1, find the sticker on the footplate of the gate that indicates the IN/prev and

OUT/next direction.

The flow is from the OUT of one gate, to the IN of the next gate.

Follow the IN backwards, until you have arrived at the first gate. That is gate number 1.

The OUT of the Power Inserter should be connected to the IN of gate number 1.

If this procedure is not executed correctly, the RFID technology will not work.

In the following examples, the location types in the table below occur.

A

Sales floor

B

Toilet

C

Stock room