N. V. Nederlandsche Apparatenfabriek NEDAP SENSITEPL Manual Do Utilizador
SENSIT SYSTEM | MANUAL
RelayNodeTool
18/92
4
RELAYNODETOOL
The RelayNodeTool software is developed to get a good estimation of the needed system
components; Data Collectors and Relay Nodes. The estimation of needed components is
based on drawings of the site. In this way you are able to get a good idea of the needed
components.
components; Data Collectors and Relay Nodes. The estimation of needed components is
based on drawings of the site. In this way you are able to get a good idea of the needed
components.
In this example we are going to design the SENSIT system for two segments; the parking
basement and the outside parking terrain at the Nedap Headquarter office.
basement and the outside parking terrain at the Nedap Headquarter office.
4.1
SCALED DRAWING
First get a drawing of the parking lot(s) and find out if it are open areas or closed (indoor)
areas. Try to get information about mounting locations, like lampposts and poles for Relay
Nodes and power and internet for the Data Collector. Below you can find a map of the
Nedap Headquarter office, with its parking areas.
areas. Try to get information about mounting locations, like lampposts and poles for Relay
Nodes and power and internet for the Data Collector. Below you can find a map of the
Nedap Headquarter office, with its parking areas.
Figure 2: Example drawing of parking lots.
The drawing of a segment can be copied out of the larger map e.g. via the standard
Snipping Tool of Windows.
Snipping Tool of Windows.
Figure 3: The Basement and the outside area.
Note
Please keep in mind that with
help of this RelayNodeTool
you can determine the
needed components, but it
will always be an estimation.
Please keep in mind that with
help of this RelayNodeTool
you can determine the
needed components, but it
will always be an estimation.