N. V. Nederlandsche Apparatenfabriek NEDAP SENSITEPL Manual Do Utilizador
SENSIT SYSTEM | MANUAL
Data collector Configuration
34/92
6.3.1 RED LED
If the LED flashes red a packet is transmitted.
6.3.2 AMBER LED
Below you can find a description of the behavior of the amber colored LED:
Permanently off
Modem is in one of the following modes:
Power Down, Airplane, Charge Only, Non-Cyclic Sleep Or Cyclic Sleep
Modem is in one of the following modes:
Power Down, Airplane, Charge Only, Non-Cyclic Sleep Or Cyclic Sleep
600 ms on / 600ms off
Limited Network Service:
No SIM card inserted, no PIN entered, network search in progress, ongoing user
authentication or network login in progress.
Limited Network Service:
No SIM card inserted, no PIN entered, network search in progress, ongoing user
authentication or network login in progress.
75 ms on / 3 s off
IDLE mode:
The modem is registered to the GSM network. No call is in progress.
IDLE mode:
The modem is registered to the GSM network. No call is in progress.
75 ms on / 75 ms off / 75 ms on / 3 s off
The modem is actively connected to the GPRS network. In this state the modem is
able to communicate with the SENSIT Server.
The modem is actively connected to the GPRS network. In this state the modem is
able to communicate with the SENSIT Server.
6.4
VERIFY COMMUNICATION
Via the SENSIT Interface Software (SIS) a more detailed description can be found in chapter
13.1. After choosing: Detection Data Collector choice at the left side of the screen. The
powered and to the internet connected Data Collector, should show up automatically in the
Data Collectors connected list.
13.1. After choosing: Detection Data Collector choice at the left side of the screen. The
powered and to the internet connected Data Collector, should show up automatically in the
Data Collectors connected list.