N. V. Nederlandsche Apparatenfabriek NEDAP SENSITGW Manual Do Utilizador
SENSIT SYSTEM | MANUAL
Frequently Asked Questions
101/111
Frequently Asked Questions
SENSIT INTERFACE SOFTWARE (SIS)
W
What is the SIS?
The SIS (SENSIT Interface Software) allows for easy configuration and filtering of
event messages received by the SENSIT Gateway. The SIS enables configuration,
installation, basic administration and integration of the SENSIT system SIS
functionality includes;
The SIS (SENSIT Interface Software) allows for easy configuration and filtering of
event messages received by the SENSIT Gateway. The SIS enables configuration,
installation, basic administration and integration of the SENSIT system SIS
functionality includes;
x
Easy integration via SOAP or REST
x
Easy remote support via web interface
x
DNNP (Dynamic Node Numbering Protocol)
x
Connection of multiple SENSIT Gateways
x
Filtering of events
x
Easy event configuration
x
Easy management of the entire Wireless SENSIT Network
x
Automatic calibration
x
Debug and analyze tool
x
Automatic collection of missing messages
x
Configuration of parking bays
x
Stand-alone system with control of display per zone.
x
Graphics to indicate parking spaces and overstay
Why use a SIS?
Configuration and integration of the data from the SENSIT system becomes much
easier. The site can be accessed remotely allowing Nedap to give you better support
on the installation.
Can I control a display with the SIS?
Yes using a wireless display node built-into a display, the display can become part of
the Wireless SENSIT Network (WSN). You can set in the SIS software which parking
zone the display should control and indicate. See chapter 17.8.7 for more
information. Using this option a simple standalone application could be created with
displays indicating available spaces. No more than 2 wireless displays are allowed in
the WSN to make sure the display messages aren’t influencing the WSN too much.
Configuration and integration of the data from the SENSIT system becomes much
easier. The site can be accessed remotely allowing Nedap to give you better support
on the installation.
Can I control a display with the SIS?
Yes using a wireless display node built-into a display, the display can become part of
the Wireless SENSIT Network (WSN). You can set in the SIS software which parking
zone the display should control and indicate. See chapter 17.8.7 for more
information. Using this option a simple standalone application could be created with
displays indicating available spaces. No more than 2 wireless displays are allowed in
the WSN to make sure the display messages aren’t influencing the WSN too much.