N. V. Nederlandsche Apparatenfabriek NEDAP SENSITGW Manual Do Utilizador
SENSIT SYSTEM | MANUAL
RelayNodeTool
28/111
RelayNodeTool
4.4.4 PLACE THE RELAY NODE
Place the Relay Nodes at locations were you can mount it e.g. at lampposts in a way
that it covers all parking bays. With the tool you can choose between Relay Nodes
2G omni- or directional.
There are 2 large concrete walls and after every 3 parking bays there is large
concrete pillar, all is indicated with red. This will influence the range and radiation
pattern of the Relay Nodes.
that it covers all parking bays. With the tool you can choose between Relay Nodes
2G omni- or directional.
There are 2 large concrete walls and after every 3 parking bays there is large
concrete pillar, all is indicated with red. This will influence the range and radiation
pattern of the Relay Nodes.
Figure 13: Imported map with concrete wall and pillar indication.
Probably with only 3 Relay Nodes 2G it is possible to get coverage of all bays, but
because of these large influencing concrete objects we used 2 Relay Nodes 2G extra
to make sure all SENSIT sensors are sufficient reachable.
because of these large influencing concrete objects we used 2 Relay Nodes 2G extra
to make sure all SENSIT sensors are sufficient reachable.
Figure 14: RelayNodeTool: RelayNode placement