N. V. Nederlandsche Apparatenfabriek NEDAP SENSITGW Manual Do Utilizador
SENSIT SYSTEM | MANUAL
Installation SENSIT Gateway
36/111
Installation SENSIT Gateway
6.3.6 SIM CARD
Insert the standard (mini) SIM card at the top of the PCB as indicated.
Figure 24: SIM Card installation
6.3.7 ANTENNA
The SENSIT Gateway is featured with two antennas. One for communication with the
SENSIT nodes and the other is the mobile 3G antenna.
SENSIT nodes and the other is the mobile 3G antenna.
Note
Make sure your remove the
pin code from your SIM-
card e.g. by using your
mobile phone.
Note
Example of standard (mini)
SIM card.
Make sure your remove the
pin code from your SIM-
card e.g. by using your
mobile phone.
Note
Example of standard (mini)
SIM card.
Figure 23: Mini SIM card
N
Note
SIM card must be capable
to receive and transmit SMS
messages and to transfer
Data.
N
SIM card must be capable
to receive and transmit SMS
messages and to transfer
Data.
N
N
ote
Data usages is normally
less than 250MB per
month.
less than 250MB per
month.
N
N
ote
Some mobile providers
disconnect an open TCP
connection when no data
transfer take place. The
Gateway expect an
uninterrupted TCP
connection.
N
disconnect an open TCP
connection when no data
transfer take place. The
Gateway expect an
uninterrupted TCP
connection.
N
N
ote
By default every 2 minutes
a small package is
transmitted by the SIS to
verify the open TCP
connection.
a small package is
transmitted by the SIS to
verify the open TCP
connection.