N. V. Nederlandsche Apparatenfabriek NEDAP SENSITGW Manual Do Utilizador
SENSIT SYSTEM | MANUAL
SENSIT Interface Software
73/111
SENSIT Interface Software
Figure 56: Add/Edit a permit zone screen
A permit zone can be a parking lot(s), a parking zone(s), one or a selection of bays.
This can easily be selected in the screen below.
This can easily be selected in the screen below.
Figure 57: Permit zone bays assignment screen
DETECTION
17.7.1 GATEWAY
In the SENSIT Gateway menu you can configure communication gateway settings
between the SENSIT Gateways and the SENSIT Server. Furthermore the screen
provides an overview of the current SENSIT Gateway settings. The list of SENSIT
Gateways is automatically updated.
Gateway server setting
Select 'enabled' to enable the connection from SENSIT Gateway to the server. Enter
the TCP port (or default SSL port), to accept connections from the SENSIT Gateway(s).
For a remote hosted SENSIT Server, the port number should not be changed.
Because the port numbers are assigned by the Nedap system administrator.
SENSIT Gateway connection settings
In this menu you can set 'Host name' and communication 'Port' for the SENSIT
Gateway. The SENSIT Gateway is displayed as a node, see below. The hostname of
the SENSIT Gateway can normally be found on the housing. The SENSIT Server will
try to establish a connection with the specified SENSIT Gateway. This does not work
on remote hosted SENSIT Servers. See gateway server settings above.
The screen provides an overview of the current SENSIT Gateway settings. When
entering new SENSIT Gateways, the table is automatically updated.
between the SENSIT Gateways and the SENSIT Server. Furthermore the screen
provides an overview of the current SENSIT Gateway settings. The list of SENSIT
Gateways is automatically updated.
Gateway server setting
Select 'enabled' to enable the connection from SENSIT Gateway to the server. Enter
the TCP port (or default SSL port), to accept connections from the SENSIT Gateway(s).
For a remote hosted SENSIT Server, the port number should not be changed.
Because the port numbers are assigned by the Nedap system administrator.
SENSIT Gateway connection settings
In this menu you can set 'Host name' and communication 'Port' for the SENSIT
Gateway. The SENSIT Gateway is displayed as a node, see below. The hostname of
the SENSIT Gateway can normally be found on the housing. The SENSIT Server will
try to establish a connection with the specified SENSIT Gateway. This does not work
on remote hosted SENSIT Servers. See gateway server settings above.
The screen provides an overview of the current SENSIT Gateway settings. When
entering new SENSIT Gateways, the table is automatically updated.