PRÜFTECHNIK Condition Monitoring GmbH VCRFBR Manual Do Utilizador
9
VIBCONNECT RF 11.2011
Safety
Chapter 2: Safety
VIBCONNECT RF has been designed according to the harmonized
standards and technical specifications listed below. It therefore
conforms to the latest state of technology and provides best pos-
sible safety.
standards and technical specifications listed below. It therefore
conforms to the latest state of technology and provides best pos-
sible safety.
During installation and operation, there are, however, some residual
risks that cannot be eliminated by technical measures.
risks that cannot be eliminated by technical measures.
Please always comply with the general safety instructions in this
chapter, and with the safety instructions in the other chapters
of this manual. The safety instructions tell you what you need to
do to protect yourself and other persons as well as property and
equipment from harm.
chapter, and with the safety instructions in the other chapters
of this manual. The safety instructions tell you what you need to
do to protect yourself and other persons as well as property and
equipment from harm.
Please note that the system operator shall be responsible for any
damage to persons or property resulting from non-compliance
with the instructions in this manual.
damage to persons or property resulting from non-compliance
with the instructions in this manual.
2.1 Safety symbols
CaUTION
Instructions for the prevention of injury.
Non-compliance might result in minor or moderate injury.
Non-compliance might result in minor or moderate injury.
Note
General notes
for the prevention of damage to property.
for the prevention of damage to property.
2.2 Information for the system operator
Duties of the system operator
During operation, maximum safety can only be achieved, if all ne-
cessary measures are taken. It is the duty of the operator to ensure
that these measures are properly planned and implemented.
In particular, you must ensure that
• the system is only be used for its intended purpose
• the system is only operated when it is in proper working condition
cessary measures are taken. It is the duty of the operator to ensure
that these measures are properly planned and implemented.
In particular, you must ensure that
• the system is only be used for its intended purpose
• the system is only operated when it is in proper working condition