Toshiba Client Solutions CO. LTD. UMET401WL Manual Do Utilizador

119

2. When the battery is fully charged and the gigabeat

®

 is operated at normal 

temperature (25×C) at the factory-set volume level. These continuous 
playback times vary depending on the operating conditions, ambient 
operating temperature, and number of times the battery has been charged, 
among others. These specifications are provided only as a reference and 
are not guaranteed. Even within the specified operating conditions, using 
the gigabeat

®

 at lower temperatures will shorten the continuous playback 

time. 

3. Playing data with the H2C Technology (Harmonics) or playing WAV 

audio data or WMA 9 Lossless data consumes considerable battery power. 
Accordingly, the continuous playback time will become significantly 
shorter compared to when Harmonics is turned off or MP3 or WMA data 
is played. 

4. The color LCD is designed and manufactured using high-precision 

technology. Some pixels do not turn on or always remain on, but this does 
not indicate malfunction. 

5. To operate the gigabeat

®

 in the USB 2.0 mode, a USB 2.0 interface must 

be pre-installed on the computer. The gigabeat

®

 functions as a USB 1.1 

device when connected to a USB 1.1 interface.

The combinations of sampling frequencies and bit rates at which 
audio data can be played on the gigabeat

®

 are shown below. Audio 

data may not be played properly if any other combination is used. 

Sampling frequency: 8 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.1 kHz, 

48 kHz

Bit rate: 32 kbps ~ 320 kbps

Sampling frequency: 8 kHz, 11 kHz, 16 kHz, 22.05 kHz, 32 kHz, 

44.1 kHz

Bit rate: 16 kbps ~ 64 kbps

Sampling frequency: 8 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.1 kHz, 

48 kHz

Bit rate: CBR 32 kbps ~ 320 kbps, VBR 32 kbps ~ 355 kbps