Embed International Pty Ltd STS101 Manual Do Utilizador
www.embedcard.com
5
Picture shows typical mounting of device on a game
Recommended Installation Hardware
The following is a recommended range of hardware to securely install and mount the smartTouch
Swipe reader. The smartTouch Swipe reader uses 4mm brass inserts in the base of the enclosure
so the appropriate length 4mm metric screws must be used to properly secure the smartTouch
Swipe reader. All other hardware can be adjusted to what is most appropriate and available in
your area.
M4 metric, pan head, Philips drive, and zinc coated steel screws.
The following is a recommended range of hardware to securely install and mount the smartTouch
Swipe reader. The smartTouch Swipe reader uses 4mm brass inserts in the base of the enclosure
so the appropriate length 4mm metric screws must be used to properly secure the smartTouch
Swipe reader. All other hardware can be adjusted to what is most appropriate and available in
your area.
M4 metric, pan head, Philips drive, and zinc coated steel screws.
Used to secure the smartTouch to the surface of the game or attraction.
Recommended you have lengths of 10mm, 20mm and 25mm available as
a minimum.
M4 metric, zinc coated steel washers.
Recommended these are used under every screw.
M4 metric, zinc coated steel full width nuts