SHENZHEN AOB ELECTRONICS CO. LTD ES-13019BT Manual Do Utilizador

Página de 8
 
 
INSTRUCTIONS FOR USE 
Charging Instructions 
The speaker comes with a built in rechargeable battery. Before using it for the first time we 
recommend you charge the battery fully. 
 
Connect the USB cable to a computer USB port and the Mini USB plug to the charging port of 
the speaker. The Red LED illuminates while the speaker is being charged. It takes around 3 
hours for the unit to fully charge. When the battery is fully charged the red LED will turn off. 
When the battery is low, an indication tone (only at Bluetooth paired mode) will alert you. When 
this occurs, please charge the speaker. 
 
Turning on/off the speaker 
There is an on/off switch at the back of the speaker. You can turn on/off the speaker with this 
switch. In order to save power, put the switch to off position when the speaker is not in use. 
 
Pairing the speaker with Bluetooth devices (phone or music device) 
Switch on the speaker. 
Place the speaker and Bluetooth device (phone or music device) so that they are no further 
than 1 meter apart. 
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer 
to the manufacturer’s instructions for instructions on enabling Bluetooth on your device. 
Once you have activated Bluetooth on your device, select the speaker “SL BBX-4/6079” from 
the list of available Bluetooth devices. 
If required, enter the password ‘0000’ to confirm & finalize pairing. 
Once paired successfully, the blue LED flashes every two seconds. 
You can now start to use the speaker. 
If pairing is unsuccessful, turn off the speaker first and then re-pair following the above steps. 
Once you have paired the speaker with a device, the speaker will remember this device and 
will pair automatically when the device’s Bluetooth is activated and in range. You do not need 
to re-pair any previously connected devices. 
The speaker will attempt to automatically connect to the last device it was paired with when 
switched on. If you want to pair it with a new device please follow the steps outlined above. 
Once the speaker is paired with your device the music will transmit directly to the speaker. 
Please refer to your device’s user manual for further information.