SHENZHEN AOB ELECTRONICS CO. LTD ES-63031BT Manual Do Utilizador
4
1. Connect the USB charging cord (included) to the charging port located at the
back of the speaker and insert the other end into a USB port of your computer or
similar power source.
similar power source.
2. The LED at the bottom of the unit turns red when the battery is being charged.
Once it is fully charged, LED will turn off. It will take around 2~3 hours to fully
charge the Battery.
charge the Battery.
Turn On/Off the Speaker
Turn the speaker On/Off using the On/Off button at the back of speaker.
Turn the speaker to Bluetooth pairing mode -
1. Switch the On/Off button to on position, located at the back of speaker.
2. The Blue LED will begin to blink, indicating it’s in pairing mode.
2. The Blue LED will begin to blink, indicating it’s in pairing mode.
(Note: If you have paired to the speaker before, then the speaker will pair automatically with the
last device it connected)
last device it connected)
Pairing your device with Bluetooth Speaker –
Your speaker can wirelessly stream audio from any Bluetooth enabled device within the
range of 33 Feet. Simply follow the below steps.
1. Turn ON the speaker and the Blue LED light will begin to blink.
2. Turn on the Bluetooth on your Mobile Phone or Tablet or Computer
3. It will search for Bluetooth devices
4. The pairing name of our Bluetooth Speaker is “Pairing name at here”, Pair it with
2. Turn on the Bluetooth on your Mobile Phone or Tablet or Computer
3. It will search for Bluetooth devices
4. The pairing name of our Bluetooth Speaker is “Pairing name at here”, Pair it with
this device.
5. If required, enter the password ‘0000’ to confirm to finalize pairing.
6. Once paired successfully, the LED turns to solid blue.
7. If you fail to pair it or you want to pair it with a new device please follows the
6. Once paired successfully, the LED turns to solid blue.
7. If you fail to pair it or you want to pair it with a new device please follows the
steps outlined above.
Select your favorite song at the Source device (mobile phone, tablet, computer etc) and
play it through the speaker
(Note: Long press play/pause button of the speaker will disconnect the Bluetooth with
your connected device. You can pair your speaker with only one device at a time. Please
unpair the speaker with existing device in order to pair it with another one.)
Answer phone call / End phone call / Redial (When Speaker is paired using
Bluetooth):
On receiving an incoming call, the speaker will prompt you caller’s number.
Short press the play/pause button to answer the call.
Short press the play/pause button again to end a call.
Short press the play/pause button twice to redial the last called number.
Short press the play/pause button to answer the call.
Short press the play/pause button again to end a call.
Short press the play/pause button twice to redial the last called number.
Do’s and Don’ts
Do not play music at excessive levels as damage to hearing and/or equipment
may result.