Nikko Co Ltd 12701TX-27 Manual Do Utilizador

Please read this user’s guide before 

installing, setting up and using your new car

www.radioshack.com

Your transmitter requires one 9V alkaline 

battery (not supplied). Replace the battery 

when your transmitter’s control range 

decreases.
1. Open the battery cover and insert the 

battery as marked (+ and -). 

2. Replace the cover. 

Your vehicle requires one 9.6V rechargeable 

battery pack (not supplied).
1. Set ON/OFF on the vehicle under the body 

on the driver’s side to OFF.

2. Use a coin to turn the battery compartment 

latch to OPEN.

3. Slide the battery compartment cover in the 

direction of the arrow and lift to open it.

4. Attach the vehicle’s connector to battery 

pack. Do not force them; they fit together 

only one way.

5. Place the battery pack in the battery 

compartment. The battery pack’s 

connector must be on the same side as 

the car’s matching connector.

6. Close the lid and snap it shut.

•  Do not use your vehicle near devices with 

transmitters using the same frequency (27 

or 49 MHz). 

•  If someone uses a CB nearby, it might 

interfere with the control of your vehicle. If 

this happens, move the vehicle away from 

the CB.

•  Never play with the vehicle in the street.
•  Be careful when you use the vehicle to 

avoid high-impact collisions with people 

and objects.

•  If your vehicle does not respond, drives 

slowly, or the range reduces, recharge the 

batteries in the vehicle.

60-4458_UG_en.indd   1

08/22/2006   16:48:24