Nikko Co Ltd TP6740H Manual Do Utilizador
English
2
RECHARGING
"WARNING! USE UNDER THE DIRECT SUPERVISION OF AN ADULT."
* The newly purchased Ni-Cd pack is not charged.
Charge before operating.
CAUTION
Do not charge Battery Pack immediately after use. Wait until it has cooled before charging.
Avoid short circuits. Short circuits will cause overheating, burning of the cords and other
damages to the Battery Pack and Charger.
The Ni-Cd Battery Charger should be used for charging one Battery Pack. Do not use the
Charger for charging other type of batteries and Battery Packs
Do not use the Charger as a direct current outlet for other electrical appliances or machines.
Make sure that the Battery Pack and Charger are kept out of the hands of infants and small
children while charging.
Do not charge near fires, where the temperature is extremely high, or where it is wet or damp.
The Charger will become slightly heated while charging. Allow sufficient free space around the
Charger.
If the power of the Battery Pack is weak in spite of proper charging, the batteries may be worn out
from repeated use. Replace it with a new Ni-Cd Battery Pack.
Dispose of use Ni-Cd Battery Packs correctly.
Disconnect the supply before making or breaking connections to the Battery Pack.
Avoid short circuits. Short circuits will cause overheating, burning of the cords and other
damages to the Battery Pack and Charger.
The Ni-Cd Battery Charger should be used for charging one Battery Pack. Do not use the
Charger for charging other type of batteries and Battery Packs
Do not use the Charger as a direct current outlet for other electrical appliances or machines.
Make sure that the Battery Pack and Charger are kept out of the hands of infants and small
children while charging.
Do not charge near fires, where the temperature is extremely high, or where it is wet or damp.
The Charger will become slightly heated while charging. Allow sufficient free space around the
Charger.
If the power of the Battery Pack is weak in spite of proper charging, the batteries may be worn out
from repeated use. Replace it with a new Ni-Cd Battery Pack.
Dispose of use Ni-Cd Battery Packs correctly.
Disconnect the supply before making or breaking connections to the Battery Pack.
WARNING AGAINST RECHARGING NON-RECHARGEABLE BATTERIES.
Please use this Battery Charger only for the charge of the rechargeable Battery Pack.
The Ni-Cd Battery Pack should be charged under the supervision of an adult.
Please use this Battery Charger only for the charge of the rechargeable Battery Pack.
The Ni-Cd Battery Pack should be charged under the supervision of an adult.
PREPARATION FOR STARTING OPERATION
RDC-300072-FCC falcon,caliente,
English
3 language
Pass the antenna wire through the antenna tube,
then insert the tube into the antenna tube holder.
then insert the tube into the antenna tube holder.
If the antenna tube cannot be successfully
inserted into the antenna tube holder, try holding
the root of the antenna wire with fingers of one
hand and extending the wire with fingers of the
other hand.
inserted into the antenna tube holder, try holding
the root of the antenna wire with fingers of one
hand and extending the wire with fingers of the
other hand.
1. HOW TO ATTACH ANTENNA TUBE
* Note: Be careful not to pull antenna wire too strong.
1. Join the connector of the charger to the
connector of the Ni-Cd battery pack.
connector of the Ni-Cd battery pack.
2. Plug the charger into an electrical outlet.
3. Recharge for about 4-5 hours.
4. When the recharging is over, plug out the
charger from the electrical outlet and detach the
Connectors.
Charger
Household
outlet
Ni-Cd battery pack
OR
Charger
Household
outlet
Ni-Cd battery pack
9.
6V
OR
Antenna wire
Antenna tube
Antenna tube
holder