Rothenbuhler Engineering Company Inc 1673-1 Manual Do Utilizador
1673 OPERATION MANUAL REV A
9
Item
Item Name
Description
1
ELECTRONIC KEY PORT
Electronic key must be installed to Arm and Fire Remote units.
2
LIQUID CRYSTAL DISPLAY
The LCD displays information to the user such as battery charge, operation mode, etc. Backlights when switches are pressed.
3
KEYPAD AREA
24 switches used to control the unit through various modes of operation.
4
CHARGE/PROGRAM PORT
Used to supply power to the internal charger and provides a serial connection for reading the history log and changing settings.
5
SYSTEM INDICATORS
Displays information related to system operation.
6
POWER LIGHT
Solid yellow indicates the unit is on. Flashes yellow to indicate the battery must be recharged.
7
KEY LIGHT
Solid yellow indicates the correctly programmed Controller key is installed and working. Flashes when a faulty or incorrect key is
installed.
installed.
8
TX LIGHT
Lights red when unit is transmitting.
9
RX LIGHT
Lights green to indicate an on channel carrier or when receiving a message from a Remote unit.
10
BATTERY CHARGER INDICATORS
Displays battery charging status.
11
FAST CHARGING LIGHT
Lights red to indicate the battery is being fast charged. Blinks red when charge is pending.
12
SLOW CHARGING LIGHT
Lights green to indicate battery charging is complete and the battery is receiving a slow maintenance charge. Blinks green to indicate a
charging error has occurred.
charging error has occurred.
13
INFORMATION LABEL
Shows model number, serial number, system number, and regulatory information.
14
DISARM SWITCH
When pressed, sends a Disarm command to all selected Remote Units.
15
ARM SWITCH
When pressed and held for ½ second, sends the Arm command to all selected Remote Units.
16
MENU SWITCH
Brings up the main menu screen, or returns to the default screen.
17
OFF SWITCH
Turns power off to the unit when not in use or when charging.
18
BATTERY TEST SWITCH
Pressing causes a 10 second loaded battery test. Holding for 5 seconds causes unit to discharge the battery completely for long term
storage and battery conditioning.
storage and battery conditioning.
19
ON SWITCH
Turns power on to the unit.
20
STATUS SWITCH
Requests status response from Remote Units.
21
SELECT SWITCH
Pressing once allows up to 8 Remote Units to be selected with switches (1-8). Pressing a second time locks the selection into the unit.
22
NUMERIC SWITCHES (x10)
Used for selection of Remote units and various menu options and settings.
23
FIRE SWITCH (x2)
When both FIRE switches are pressed and held simultaneously for ½ second, all Remote Units that are both selected and armed will
be fired.
be fired.
24
REMOTE READY LIGHT (x8)
Lights solid green to indicate the corresponding Remote Unit’s status is confirmed disarmed. Blinks green to indicate the corresponding
Remote Unit’s status is assumed to be disarmed (unconfirmed).
Remote Unit’s status is assumed to be disarmed (unconfirmed).
25
REMOTE BATTERY LIGHT (x8)
Lights solid yellow after receiving a status response from a corresponding Remote whose battery is ok. Blinks yellow to indicate the
corresponding Remote unit has a low battery and should be recharged.
corresponding Remote unit has a low battery and should be recharged.
26
REMOTE SELECT LIGHT (x8)
Lights yellow to indicate the corresponding Remote Unit has been selected for communications with the Controller.
27
REMOTE ARMED LIGHT (x8)
Solid red indicates the corresponding Remote Unit is confirmed to be armed. Blinks red when the corresponding Remote unit is
assumed to be armed but has not been confirmed as armed.
assumed to be armed but has not been confirmed as armed.
28
REMOTE UNIT DISPLAY AREA
Displays basic information related to the operation of up to 8 Remote Units.
Table 2-2 Controller Unit