Alps Electric WD1U827 Manual Do Utilizador

LOCK Button
UNLOCK Button
Trunk Button

　The connector is arranged as shown in the figure below.

Terminal No.

I/O

A

-

B

I/O

C

I/O

D

I/O

E

I/O

F

-

G

-

■CAUTION■

MAX 2mA(@12.5V 25℃) at standby

Weight

Consumption current

spec

MAX 230mA(@12.5V 25℃) at operation

GND

S-NET

K-LINE

This unit is installed in vehicle. It performs communication with keyless unit by
LF, processes RF signal from keyless unit, and performs actions according to
the signal.

　Unit Assy Immobi&Keyless communicates with the transponder in the
hand unit  when the user inserts the hand unit in the key cylinder, and it
rotates

Product name : UNIT ASSY IMMOBI &KEYLESS

Type : TWD1U827

Terminal Name

When the user pushes LOCK, UNLOCK, and the TRUNK button of HAND
UNIT, the RF electric wave is output, and IMMOBI UNIT receives it, and
an open lock, the close lock of the door, and the signal of the trunk
opening are output.

W69xL90.8xH77.2（mm）

B-CAN(-)

B-CAN(+)

IGN

Operating voltage

Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

Size

・Give a shock.
・Get it wet. If it got wet, wipe and dry up.
・Disassembly and modification.

Operation of frequency

   Please DO NOT the following. Engine is not started by failure of
electronic parts. (Product can not receive the signal correctly)

   Pay attention to the following.

・It may not be operated when using the equipment of the same
frequency band in the vicinity.

Keyless DC9～16V

Immobilizer DC6～16V

+B

AC/DC Supply

DC12V

This device complies with Part 15 of FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause　interference, and (2) this device
must accept any interference, including interference that may cause
undesired operation of this device.

0.075kg

Operating temperature

range

-40~＋85　degree C

RF : 313.85MHz

LF: 125kHz

IG1