Sennheiser Electronic Corp G3SKMEM Manual Do Utilizador
17
Adjusting settings via the operating menu
Overview of the frequency banks and channels:
When setting up multi-channel systems, please observe the following:
Only the factory-preset frequencies within one frequency bank are inter-
modulation-free (see page 20). Radio microphone and receiver of a trans-
mission link have to be set to the same frequency. It is vital to observe the
notes on frequency selection on page 20.
modulation-free (see page 20). Radio microphone and receiver of a trans-
mission link have to be set to the same frequency. It is vital to observe the
notes on frequency selection on page 20.
Entering a name – “Name”
Via the “
Name
” menu, you can enter a freely selectable name (e.g. the
name of the performer) for the radio microphone.
The name can be displayed on the standard displays “
Frequency/Name
”
and “
Channel/Name
”. The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Activating/deactivating the automatic lock mode – “Auto Lock“
The lock mode prevents that the radio microphone is accidentally switched
off or programed during operation. The lock mode icon
off or programed during operation. The lock mode icon
햶
on the
current standard display indicates that the lock mode is activated.
For information on how to use the lock mode, refer to page 11.
The extended menu “
Advanced Menu
”
Setting transmission frequencies and frequency banks – “Tune”
When you have selected one of the system banks and then select the
“
“
Tune
” menu, the radio microphone automatically switches to channel 1
of the frequency bank “
U1
”. In this case, “
U1.1
” briefly appears on the
display panel. Upon delivery, the channels of the frequency banks “
U1
” to
“
U6
” are not assigned a transmission frequency.
Frequency bank
Channels
Type
“
1
” to “
20
”
up to 32 per
frequency bank
frequency bank
System bank:
frequencies are factory-preset
frequencies are factory-preset
“
U1
” to “
U6
”
up to 32 per
frequency bank
frequency bank
User bank:
frequencies are freely selectable
frequencies are freely selectable
Move the multi-function switch to select a character.
Press the multi-function switch to change to the next
segment/character or to store the complete entry.
segment/character or to store the complete entry.
Move the multi-function switch to select the desired setting.
Call up “Name”
Enter a character
and confirm
and confirm
Enter a character;
store the setting
store the setting
Menu
L i c h a e l
Name
Name
Name
L
i c h a e l
M
i
chael
“Stored”
Call up
«Auto Lock»
«Auto Lock»
Select the desired
setting
setting
A c t i v e
Auto Lock
Active
Auto Lock
I n a c t i v e
Auto Lock
Menu
Store the setting
“Stored”
ew G3 SKM 500_529673_0109_SP8_PRT.book Seite 17 Dienstag, 10. Februar 2009 11:20 11