Mindray DS USA Inc. WT0707-00000 Manual Do Utilizador

• Print On Alarm displays the Print on Alarm response assigned to the parameter 

specified. 

• Save to Event displays the Save To Event alarm response that has been assigned to the 

parameter specified. 

• Page On Alarm displays the Page On Alarm response that has been assigned to the 

parameter specified. 

8.1.7.3

Arrhythmia Settings

The Patient Alarm Report’s Arrhythmia Settings section includes values for the following:

• Asystole Delay

• V-Tach  Threshold

• All Arrhythmia On/Off

• V-Tach  Rate

8.1.7.4

Paging Delay Settings

The Patient Alarm Report’s Paging Delay section includes the system paging delay value that 
was configured in the System Alarms tab. 

8.1.7.5

Footer 

The Patient Alarm Report contains a footer at the bottom of the page. The footer includes:

• The date and time of the print request. The format displayed is taken from the System 

Date/Time tab. 

• A centered page number. 

• The name of the Panorama Central Station where the report was generated. 

8.1.7.6

Printing a Patient Alarm Report 

The Patient Alarm Report is printed in portrait orientation, using any of the following 
methods:

• From  the  Patient Reports tab, select the Patient Alarm Report button.

• From  the  Alarm Limits tab, select the Print menu bar button.

Requesting this report posts a print job in the system Print Status tab. For additional 
information, refer to the “Print Status Tab” on page 8-38. 

8.1.8

Troubleshooting

This section lists some of the potential messages and issues that may occur while using the 
Patient Reports tab. 

All report buttons are disabled.

A patient is not currently 
selected.

Select a patient before trying to 
print a report.

The ST Report button is 
disabled.

The selected patient does not 
have ST enabled.

Enable ST for the selected 
patient before trying to print an 
ST report.