Mindray DS USA Inc. WT0707-00000 Manual Do Utilizador
Panorama™ Operating Instructions
0070-10-0690-01
8 - 27
Report Functions
Patient Reports Tab
• Print On Alarm displays the Print on Alarm response assigned to the parameter
specified.
• Save to Event displays the Save To Event alarm response that has been assigned to the
parameter specified.
• Page On Alarm displays the Page On Alarm response that has been assigned to the
parameter specified.
8.1.7.3
Arrhythmia Settings
The Patient Alarm Report’s Arrhythmia Settings section includes values for the following:
• Asystole Delay
• V-Tach Threshold
• All Arrhythmia On/Off
• V-Tach Rate
8.1.7.4
Paging Delay Settings
The Patient Alarm Report’s Paging Delay section includes the system paging delay value that
was configured in the System Alarms tab.
was configured in the System Alarms tab.
8.1.7.5
Footer
The Patient Alarm Report contains a footer at the bottom of the page. The footer includes:
• The date and time of the print request. The format displayed is taken from the System
Date/Time tab.
• A centered page number.
• The name of the Panorama Central Station where the report was generated.
8.1.7.6
Printing a Patient Alarm Report
The Patient Alarm Report is printed in portrait orientation, using any of the following
methods:
methods:
• From the Patient Reports tab, select the Patient Alarm Report button.
• From the Alarm Limits tab, select the Print menu bar button.
Requesting this report posts a print job in the system Print Status tab. For additional
information, refer to the “Print Status Tab” on page 8-38.
information, refer to the “Print Status Tab” on page 8-38.
8.1.8
Troubleshooting
This section lists some of the potential messages and issues that may occur while using the
Patient Reports tab.
Patient Reports tab.
MESSAGE/ISSUE *
REASON
SOLUTION
All report buttons are disabled.
A patient is not currently
selected.
selected.
Select a patient before trying to
print a report.
print a report.
The ST Report button is
disabled.
disabled.
The selected patient does not
have ST enabled.
have ST enabled.
Enable ST for the selected
patient before trying to print an
ST report.
patient before trying to print an
ST report.
*
Messages are shown in all bold text.