Ritron RIT32-152M Manual Do Utilizador

 

 

The Quick Talk

TM

 features four (4) separate inputs that can each be programmed with unique voice messages and attributes.  All 

programming is accomplished with the RITRON RQA/RQT PC Programmer software available at 

www.ritron.com

, and a standard USB 

Type A to Mini-B cable for interconnection of the PC computer to the Quick Talk

TM

. 

The programmer software requires Window

®

 XP or newer, and a PC computer with a USB port. 

After reading the radio programming, a summary screen will appear with a 
tabulated display of the input programming.  Double-click on any input 
column to program that input’s attributes.  Radio-wide features are 
programmed from the Summary Screen. 

Programming the Message Configuration must be done before recording any 
of the voice messages.  This allocates the available time for each message.  
Changing the Message Configuration will erase existing messages, requiring 
you to re-record all input messages. 

Number of Inputs – This sets the number of inputs you will be using.  
Inputs used will always start with number 1 and progress sequentially as 
you add inputs.  

Example:  If you program the RQT for 2 inputs, Input 1 and Input 2 will 
be available, it cannot be Input 1 and Input 3. 

Play Single Message Only – Setting an input for a single message 
doubles the available message time.  The single message can be either 
the Open or Closed message. 

 

 Number 

Single 

Both 

 of 

Inputs Message Messages 

 

1 input 

24 sec. 

12 sec. 

 

2 inputs 

12 sec. 

6 sec. 

 

3 inputs 

8 sec. 

4 sec. 

 

4 inputs 

6 sec. 

3 sec. 

If selected, Input status messages are 
transmitted when the RQT is powered on.  This 
may be helpful in the event of a power outage. 

 

If selected, Power Fail and Low Battery 
messages will play at the conclusion of any 
Input status message, as well as on the 
programmed schedule. 

 

If selected, a Power Fail message is transmitted 
any time External Power supply drops below 
+12 VDC. 

 

If selected, a Low Battery message is 
transmitted when the internal batteries are in 
need of replacement. 

 

If selected, the RQT will transmit a recorded 
Location message immediately prior to any Input 
status message, Low Battery message, or 
Power Fail message. 

 

RQT checks Input status every 250mS by 
default, but can be set to check every one 
second to extend battery life. 

This sets a time delay between turning on the 
RQT transmitter and playing any messages, or 
ANI strings. 

 

Enter a brief description (35 characters or less) 
of the RQT use, location, customer, etc.  This 
can be useful when reading out the Quick Talk

TM

 

programming at a later date, or when saving a 
programming profile for use with other radios.