Jiangmen Pengcheng Helmets Ltd. DWO-2 Manual Do Utilizador

Página de 16
                                                                                                                                                                         
 
  - 7 - 
2.2Putting the Velcro into the slot which has the same shape inside the helmet     
2.3 Attach the speakers to the Velcro Pads inside your helmet opposite your 
ears (short speaker cord for left ear & long speaker cord for right ear)。 
 
Note: 
Always prioritize your riding, not Mobile phone calls. During a Mobile phone conversation, or 
whilst using the interphone, deceleration
 
and concentrate on your riding. In bad weather and/or heavy 
traffic, we recommend pulling over and stopping, before answering
.
 
Operation 
(Please read the manual carefully before using the system) 
 
Power On and Off 
1.  In power off state, press CTRL and hold it for 3 seconds, until hear a “di” 
tone, release the button, Blue indicator will flash to indicate power on 
successfully. 
2.  In power on state, press CTRL and hold it for 5 seconds, until hear a long 
“di” tone, all LED indicators will be shut off to indicate the headset is 
powered off. 
 
Enter Pairing Mode 
Operating from Power off state, pressing and holding CTRL until Red/Blue 
lights flashes alternately. It is under Pairing Mode. 
Note: 
If the pairing process is not completed within one minute, the headset will turn to 
Standby mode.