FreeTek International Co. Ltd. 12011 Manual Do Utilizador

ON

ON

OFF

②

 

①

③

 

⑤

 

④

 

AMPSound

Bluetooth Personal Hearing Amplifier

AMPSound by Jabees are the Hearing-Aid Like Sound Amplifiers and a Wireless 

Bluetooth Headphones all in one. They are unique in the way they combine the benefits 

of three different products in one beautifully designed stereo headphones:

 
   Personal Bluetooth Amplifiers to boost your hearing

   Bluetooth Stereo Headphones for music streaming

   Bluetooth Headset for phone calls

LET'S EXPLORE TOGETHER!

①

  AMPSound Bluetooth Hearing Amplifier (1)

②

  Power Pouch with Built-in 3000mAh Battery Capacity (1)

③

  Single-Flange Eartips (S.M.L.) (3)

④

  Double-Flange Eartips (S.M.L.) (3)

⑤

  In-Ear Earfins (S.M.L.) (3)

⑥

  Micro-USB Charging Cable (1)

⑦

  Screwdriver

Play/Pause Music
Answer/End the Call
Reject the Call 
Transfer the Call 
Redial Last Number

Press once
Press once
Long press for 2 seconds when incoming call
Long press for 2 seconds during the call state
Long press for 2 seconds

Adjust the Volume
Enhance & Lower the Amplifier Sound 
Next/Previous Song
Mute/Unmute

Press once V+/V-
Press once V+/V-
Long press V+/V-
Press V+/V- at the same time

Unlock the magnetic earbuds
Clasp the magnetic earubds

Answer the Call
Hang Up the Call

Wearing the headphones correctly will ensure the most comfortable and secure fit.

Step 1: 
Za tight seal between eartip and ear canal to deliver great sound and bass. Three sizes 

of earfins, single-flange and double flange ertips are included to help you achieve the 

best fit. We recommend trying all of them and selecting the ones with the best sound 

and comfort for your ears.

Step 2: 
The soft silicone wings gently lock into the 

bowl of the wearer's ears：

* The wing's curve is always on the 

left side of the left earbud and on 

the right side of the right earbud.

Step 3: 
Adjust the cable cinch to reduce cable 

slack for a more secure and comfortable fit.

AMPSound must be paired to a Bluetooth device before it can be used. It is only 

necessary to pair your headphones once with each device.

Step 1: 
Switch on AMPSound. 

Step 2: 
Turn on the Bluetooth in your device. 

Step 3: 
Long press the MF Button for 2 

seconds and you will hear 'Pairing' 

along with blue and red LED light 

flashes.

NOTE:
If no pairing is possible for a period of time (approximately 2 minutes), the headphones will leave 

pairing mode and go to the idle mode automatically. 

Step 4: 
Search for 'AMPSound' and connect.

You will hear the voice prompt 'Your 

phone is connected.'

To restore AMPSound to factory setting, you will have to turn on AMPSound first, and 

make sure they are not connected with any device. Press and hold the MF Button for 

about 5 seconds. The blue and red LED lights turn on for about 2 seconds and then 

turn off, the factory reset is successful.

Jabees is a registered trademark of FreeTek International Co, Ltd. Other brands and 

product names are trademarks of their respective owners. Jabees warrants this product 

against all defects in material and workmanship for a period of twelve (12)months from 

the date of original purchase of the product. The conditions of this guarantee and the 

extent of responsibility of Jabees under this guarantee can be read in the Warranty Card.

Permanent hearing loss may result from long-term exposure to sound at high volumes. 

Use as low volume as possible and avoid  prolonged use of the earphone at excessive 

sound pressure levels.Please read the safety guidelines below prior to using the safety 

guidelines below prior to using this earphone.
(Prior to using this product follow these steps)

1. Before putting on the earphone, turn the volume control to its lowest level.

2. Put the earphone on, and then slowly adjust the volume control to a comfortable level.
(During the use of this product) 

1. Keep the volume at the lowest level as possible.

2. If increased volume is necessary, adjust the volume control slowly.

3. If you experience discomfort or ringing in your ears, immediately discontinue using 

the earphone. With continued use at high volume, your ears may become accustomed 

to the sound level, which may result in permanent damage to your hearing without any 

noticeable discomfort.

Step 2. 
Turning the Battery Capsule clockwise into the slot of the Power Pack. 

Step 1. 
Turning the Battery Capsule counterclockwise to remove the battery.

Step 5. 
Turning the Battery Capsule counterclockwise 

to remove the battery from the Power Pack. 

Step 6. 
Turning the Battery Capsule clockwise into 

the ear bud.

Step 3. 
Press the button on the Power Pack to 

recharge the Battery Capsules, the LED 

Lights turn on when charging. 

Step 4. 
The LED Charging Status Indictor Lights 

turns off when fully charged. 

WARM REMINDER
Removing both Battery Capsules from the ear buds will turn off AMPSound. If you need to keep AMPSound 

working, you can charge the Battery Capsules ONE BY ONE.

1. If you have a cardiac pacemaker or other electronic medical equipment, you should 

consult your physician before using this product. 

2. This product contains small parts that may be hazardous to children. Keep out of the 

reach of children. The bags themselves or the many small parts they contain may 

cause choking if ingested.

3. Never attempt to disassemble the product yourself, 

or push other objects into this product, as this may cause short circuit,which led to the 

fire or get an electric shock.

4. None of the components can be replaced or repaired by users.Only authorized 

dealer or service center may open the product.

5. If any parts of your product require replacement for any reason,including normal 

wear and rear or breakage, please contact your dealer.

6. If the product overheats, has been dropped or damaged or has been dropped in a 

liquid, discontinue use.

Be sure to ensure safe driving, avoid distractions and follow local laws.  

 

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a residential installation. This 

equipment generates uses and can radiate radio frequency energy and, if not installed 

and used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or more of the following 

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment. This device complies with Part

15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

The Power Pack of AMPSound is with built-in 3000mAh battery capacity. It can be used 

to charge the Battery Capsules, as well as the mobile phones.

①

  LED Indicator Lights

②

  USB Output for Charging the Mobile Phone.

③

  Input for Charging the Power Pack

④

  LED Charging Status Indicator Lights

⑤

 Internal Mesh Pocket

Wireless Music Streaming
AMPSound features the aptX technology 

for the CD-like quality music when you 

are listening to your favorite tune. 

Note: Please turn off the Hearing Amplifier Mode if 

you want to listen to music.

Note: When there is incoming call, the Hearing 

Amplifier Mode will be automatically switched to 

the Bluetooth Handsfree mode. When the call 

ends, the headphones will be switched back to 

the Hearing Amplifier Mode. 

AMPSound can be used as a conventional Bluetooth Stereo Headphones for Music 

Streaming and Phone Call after pairing and connecting with your device.

(Please refer to 'BLUETOOTH PAIRING & CONNECTION' section.)

Wireless Handsfree
AMPSound can be used to receive and 

make calls, and voice message on 

Whatsapp, Wechat, Skype and so on. 

Turn On the Hearing Amplifier Mode
Switch on AMPSound, then long press the MODE 

Button for about 2 seconds.

Turn Off the Hearing Amplifier Mode
Double click the MODE Button, then switch off 

AMPSound.

Enhance & Lower the Amplifier Sound
There are 16 volume levels to boost the sound 

up to 125dB. Press once V+ and V- to enhance 

or lower the sound. 

AMPSound by Jabees is the Bluetooth Personal Hearing Amplifiers that amplify sounds 

and enhance your hearing experience so your conversations become more effective in 

the car, in social situations, and at a distance. It is designed for people of any age with 

Step 2: 
Turn off the Bluetooth in the 1st Paired Device. 

Turn off the AMPSound.

Step 1: 
Turn on the multipoint feature by short pressing the V+ and V- at the same time, please 

make sure the headphones are on and not connected with any device.

Step 3: 
①

 Pair with the 2nd Device -Follow the procedure 

described above about the BLUETOOTH PAIRING.
②

 Turn off AMPSound after connection successful. 

Multipoint allows two Bluetooth devices to be connected to AMPSound simultaneously. 

Both devices will need to be paired before Multipoint can be used. 

Multipoint

MF Button

Volume Buttons

Magnetic Lock Earbuds 

（

L）

（

M）

（

S）

（

L）

（

M）

（

S）

（

L）

（

M）

（

S）

press for 2 seconds

Step 4: 
Turn on AMPSound again, will automatically connect to the 2 most recently paired 

devices.

You can turn off the multipoint feature by long pressing the V+ and V- at the same time 

for 3 seconds when the headphones are on but not connected with any device. This will 

ensure the better music performance.

1st Paired Device

OFF

① 

2nd Paired Device

OFF

②

ON

Maximum Saturated Sound Pressure Level (SSPL)

High Frequency Average Gain

Average Full-on Gain

Standard Frequency Response Curve

Equivalent Input Noise (EIN) Level

Harmonic Distortion

Battery Life

≤125dB ±3dB

118±3dB

58 dB±5dB

300Hz-5KHz

≤18dB

≤4%

Up to 7 hrs(Subject to the surrounding noise level)

V+

V-

MODE Button

LED Indicator Lights to Show the 

Remaining Capacity
4 LED on: 100%        3 LED on: 75%

2 LED on: 50%          1 LED on: 25%

AMPSound

by Jabees

BTHS20160808_V1.0

①

  On/Off Switch 

②

  MODE Button 

③

  MF Button (Multifunction Button) 

④

  LED Light

⑤

  Microphone 1 

⑥

  Microphone 2 

⑦

  Cable Cinch 

⑧

  Volume up / Next Song 

⑨

  Volume down / Previous Song

⑩

  Removable Battery Capsule

FCC ID：ALE12011

Bluetooth

STOP

Your device(Samsung Galaxy S7 edge) is
currently visible to nearby devices. 

On

Paired devices

AMPSound

Available devices

M

+

STOP

Bluetooth

STOP

Your device(Samsung Galaxy S7 edge) is
currently visible to nearby devices. 

On

Paired devices

AMPSound

Available devices

Bluetooth

SCAN

Turn on Bluetooth to see a list of devices you 
can pair with or have already paired with.

Off

M

+

①

 

③

 

④

 

⑤

 

⑧

 

⑨

 

⑩

 

⑩

 

②

 

⑥

 

⑦

 

②

 

①

 

③

④

 

⑤

⑥

⑦

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

- 13 -

- 14 -

- 15 -

- 16 -

- 17 -

- 12 -

- 11 -

- 10 -

- 9 -

- 17 -

- 1 -

- 2 -

- 3 -