Uniden America Corporation UC577R Manual Do Utilizador
45
4) The phone will ask you to confirm the deregistration.
Select Yes. The handset will clear its registration
information only from the base it is currently connected to,
and then delete the link to the base from its own memory.
information only from the base it is currently connected to,
and then delete the link to the base from its own memory.
If the handset cannot contact the base, it will display Out Of
Range. Make sure the handset is in range of the base and
the base is connected to power.
If you don’t have the base the handset is registered to:
1) Press and hold END and # for at least five seconds.
Range. Make sure the handset is in range of the base and
the base is connected to power.
If you don’t have the base the handset is registered to:
1) Press and hold END and # for at least five seconds.
Select Base Unavailable.
3) Select the base which you want to de-register from, and
then press MENU/SEL.
4) The phone will ask you to confirm the deregistration.
Select Yes. The handset deletes its own base information
without contacting the base. If the handset was
registered to only one base, it displays Handset not
registered-place handset on base to register. See your
Owner's Manual for help. If the handset is still registered
to another base, it searches for the other base and then
returns to standby.
without contacting the base. If the handset was
registered to only one base, it displays Handset not
registered-place handset on base to register. See your
Owner's Manual for help. If the handset is still registered
to another base, it searches for the other base and then
returns to standby.
Re-registering the handset
After the handset is de-registered, you must re-register the
handset before you can use it.
1) Place the handset in the base cradle for several seconds.
2) When the handset has registered to the base, the LCD
will display Registration complete then show the handset
ID number.
If the display shows Registration failed, try the process
again.
ID number.
If the display shows Registration failed, try the process
again.