Uniden America Corporation UN110 Manual Do Utilizador
27
USING THE ANSWErING SYSTEm
The answering system works with land line calls only. The system will
not answer or take messages on incoming call on the paired Bluetooth
phones.
not answer or take messages on incoming call on the paired Bluetooth
phones.
Answering System Options (Ans. Setup)
You can change the answering system options from any handset. Just
open the menu and select
open the menu and select
Ans. Setup
. Select one of the following:
Setting
What it does...
Security Code
Enter a 2-digit PIN so you can access your
answering system from any touch-tone phone
(see page 31).
answering system from any touch-tone phone
(see page 31).
Ring Time
Set the number of rings (2, 4, or 6) before the
answering system answers the phone. Choose
Toll Saver to have the system answer after 2
rings if you have new messages or after 4 rings if
you don’t.
answering system answers the phone. Choose
Toll Saver to have the system answer after 2
rings if you have new messages or after 4 rings if
you don’t.
Record Time
Set the amount of time callers have to leave a
message, either 1 minute or 4 minutes. Choose
Announce Only if you don’t want the system to
let callers to leave a message.
message, either 1 minute or 4 minutes. Choose
Announce Only if you don’t want the system to
let callers to leave a message.
Message Alert
Have the system beep every 15 seconds when
you have a new message; the beeping stops
when you listen to all your new messages.
(To mute the alert without listening to your
messages, press any key on the base.)
you have a new message; the beeping stops
when you listen to all your new messages.
(To mute the alert without listening to your
messages, press any key on the base.)
Ans. Language
Change the language of the system’s voice
prompts.
prompts.
Call Screen
Turn on the call screen feature so you can hear
callers as they leave messages on the base
speaker (see page 30).
callers as they leave messages on the base
speaker (see page 30).