Uniden America Corporation UT919 Manual Do Utilizador

Página de 36
Charging the Battery Pack
Your marine radio is powered by a specially designed Ni-MH
battery pack.
• Before operating the MHS350, charge the Ni-MH battery pack for
4 hours 
without interruption with the Adapter.
Plug one end of the AC adapter into the
wall outlet and the other end into the
Adapter jack on the side of the Charging
Cradle.
Make sure your radio is OFF, and place the
radio in the front of the Charging Cradle. You
can also charge another battery at the same
time. Place it in the back of the Charging
Cradle.
Charge the battery for 4 hours.
• The charger won’t overcharge the battery pack.
After 4 hours without interruption, the LED on
the Charging Cradle turn off and charging is
completed.
• Be sure to replace the rubber cap after charging in order to
secure the waterproof seal.
• The radio will not charge the battery while on and receiving
incoming voice traffic.
• When you mount the Charging Cradle on your boat, use the DC
adapter instead.
• The jack is for charging only. If the battery level is low, the radio
needs to charge before use.
3
2
1
10
UT919ZH(MHS350)ENG.QX  12/19/03  5:26 PM  Page 10