Honeywell International Inc. 9PGTPL-100A Manual Do Utilizador
Page 1029
1 Mar 2006
34-45-54
MAINTENANCE MANUAL
TPL-100A Processor / Part No. 940-0530-001
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
B. Configuration Display Screen
Pushing the Select button when the Configuration is the Active Selectable Item on the
Menu screen causes the Configuration Screen to come into the view. A representation of
a two page Configuration screen is shown in Figure 1007.
Menu screen causes the Configuration Screen to come into the view. A representation of
a two page Configuration screen is shown in Figure 1007.
The screen title is CONFIG. The lines two, three, and four of page 1/2 contain the software
part number(s). Pushing the Scroll button causes page 2/2 of the CONFIG screen to come
into the view. The hardware part number and the unit serial number are shown on the
screen. The Active Selectable Item is GO BACK. Pushing the Select button while the
caret is at GO BACK, causes a return to the Menu screen.
part number(s). Pushing the Scroll button causes page 2/2 of the CONFIG screen to come
into the view. The hardware part number and the unit serial number are shown on the
screen. The Active Selectable Item is GO BACK. Pushing the Select button while the
caret is at GO BACK, causes a return to the Menu screen.
Figure 1007. Typical Configuration Display Screen
C. Inputs Display Screen
Pushing the Select button when Input is the Active Selectable Item on the Menu Screen,
causes the Input select screen page 1/3 to come into the view. See Figure 1008. Refer to
Table 1009 for Program Pin displayed text and fault descriptions.
causes the Input select screen page 1/3 to come into the view. See Figure 1008. Refer to
Table 1009 for Program Pin displayed text and fault descriptions.
Program Pins Display Screen
Refer to Figure 1008 for typical input display screens.